Paper Cutting Machine

Time cost savings

A paper bag machine, on the other hand, saves you a lot of time as they use sophisticated cutting and designing tools to create tailor-made bags to suit your requirements.

  • Quality Standards
  • 100% Durable
  • 100 Bags within minutes

Flexibility

We understand that our clients’ tastes are different and that they would require different sizes of bags at different times. The blade and gear adjustments of our machine make the process of creating bags look very easy and simple.

  • Different Sizes 
  • Blade Adjustments
  • Gear Adjustments

High quality

Jenan Overseas Exports handmade paper bags may get damaged due to a slight human error at times. However, in the case of paper bag making machines, there is no chance of error at all as the settings are pre-set, and the process is 100% automatic.

  • 100% Automatic
  • Very High Quality 
  • No Chance of Error

Low maintenance

Paper bag machines run on electricity, but the good thing is that they don’t consume a lot of power. Also, our machines are very well-maintained; therefore, they don’t breakdown frequently. Most of the paper bag machines across the world use very good technology.

  • Very good Technology
  • High Quality Output
  • Zero Repair costs

Paper Cutting Machine

Fully Automatic Hydraulic Type Paper Cutting Machine

The High Speed Cutting Machine is specifically Designed to cut board, Plastics, Aluminum, PVC Film, Wood Veneers, Asbestos board, Emery Cloth, Rubber and Leather as well as other Sheet Material that is to be cut with precision and speed. The Friends Makes 115 EMC, High Speed Cutting Machine is a high performance machine designed specifically for the Paper Mills, Offset printers, Print shops, Book Binders , Copier paper industry and stationary industry.

Salient Features

Programmes

The Storage capacity of the programme is 99 programmes and one programme capacity is 99 cuts in this machine. The accuracy of the programme is 0.01 mm 0.001 inch. Conversion from mm to inch fraction is also possible. The programme controls the backguage with double speed. The machine has a 1:6 ratio motor is installed for very accurate clutch brake system.

Back Gauge Accuracy

Control through upper moving system Perfecta (Seypa) Type. The screw is running on ball bearings. Back-gauge guide moves at grinded pillar.

Drive Gear Box

The worm gear drive has ground worm and needs less power than any other conventional drive. The gears are running in oil bath.

Air Cushion Table

Helps to move the paper stack very easily.

Hydraulic Clamp

An advance design, together with new technology concepts have account for increasing rationalization and the consequent performance requirements. Friends range now has a new drive Mechanism for clamping. The special features of this machine are double clamping pressure and gentle setting of the clamp on the paper to be cut. The clamping pressure is adjustable with a knob positioned under the table at a convenient place.

Indication Light

A Beam of light falls across the Knife width, on the paper to be cut without lowering the clamp. This ensures proper cutting.

Knife Changing Device:

The knife can be changed easily by lift system and safely by a single operator.

Photo Electric Safety

Guard A set of infra red light beams are projected in front of the cutting zone just above the table to avoid an accident.

TECHNICAL DATA
Number of Programmes99
Max Stop Number99
Measuring SystemAlternate ( in millimeters and Inches )
Cutting Width (mm / Inch)115 cm per 45 ¼”
Clamp opening (mm / Inch )14 cm per 5 ½”
Smallest Remainder Strip1.5 cm(0.5″)
Deep Depth (mm / Inch)115 cm per 45 ¼”
Power required5 H.P (for Main Drive)
Back Gauge Drive1 H.P.
Air Blower1 H.P.
Front Table Length½”
Clamp Pressure (Min.)100
Maximum Pressure3700
Table Height of the machine33″
Capacity cuts per minute42 cuts

Semi Automatic Paper Cutting Machine

Salient Features

Friction clutch system for maximum efficiency and minimum maintenance.

Rapid type hand clamp and Foot Clamp for smooth and easy operation.

Easy replacement of knife. Fine adjustment of knife height by eccentric levers.

Adjustable back gauge for accurate parallelism with knife edge. Device provided with locking arrangement to avoid shift in the position of back gauge during operation.

Safety and saving of space.

Centralised lubrication of moving parts.

TECHNICAL DATA
Machine Size33″36″43″
Length of Cut33″36″43″
Width of Cut33″36″43″
Pile Cut4″4.5″5″
Cuts per Minute32″28″25″
Power Required H.P.2″25
Approx. Weight Kg.160018002000

Paper Cutting Machine

Paper Cutting Machine Video